PDIC - Mobile Banking Vehicles and Installations

Ballistic Check Cashing or Service Center

A	formica, 1011 deep work counter
B	teller tray
C	1-3/16" bullet resistant glass w/stainless steel
D	2" x 2" angle
E	30" door opening, left or right swing
F	cosmetic exterior "T" strip/sealer
G	cosmetic exterior angle strip/sealer at each corner
H	top of formica counter, 43"
I	bullet resistant teller window - aprox. 18" wide, 24" high w/stainless steel dip tray
J	six foot sides comprises of three 2' x 7'6" interchangeable panels
K	interior support: top, counter height, and floor; door frame; 2" x 2" angle

mobile_page3_photo_1.jpg (21081 bytes)

Bullet Resistant Service Partition

Standard Service Partition Specifications:
	Construction / Specifications
Overall	frame: all metal
Outside	flat black epoxy
Transparency	Level II protection
Dip Tray	stainless steel
Metal Facing	ballistic expanded metal Includes voice transfer chamber

Affordable protection without unsightly bars, frames or cumbersome voice transmission gadgets. P.D.I.C.'s transparent bullet resistant service partition comes metal framed with pass through and voice transfer chamber.

The standard partition, LEVEL II, is ready for installation in standard wall studding or other service areas.

Custom service partitions and higher ballistic levels are quoted on request.